On all toner cartridges and drum units it is best to vacuum them out before you refill them, if they have never been refilled before. To get more toner, drums or any other items needed go to All Supplies at the top of this page.

SHIPPING SEAL INFO ON THIS TONER CARTRIDGE

The Shipping Seal. You can not ship the cartridge anywhere with out this put in place.

1.) Locate the small flat rubber seal plug on the fill end of the hopper and use jeweler's screwdriver to push the plug out from inside the hopper. This will allow the pull end of the seal to pass through the opening. Note: Be sure the old seal is completely removed and the area is clean before installing a new seal.

2.) To apply an shipping seal, remove the seal backing and align it against the edges of the hopper. Then fold the pull-end of the seal back and through the opening. Replace the rubber plug.

3.) Now you can reassemble the cartridge and it is read to be shipped.

The way to brack down, clean out or replace any bad parts, when refilling. Here is the break down way.

We have had many cartridge that have been refilled more than 30 times.