On all toner cartridges and drum units it is best to vacuum them out before you refill them, if they have never been refilled before. To get more toner, drums or any other items needed go to All Supplies at the top of this page.

FAST EASY REFILL ON THIS TONER CARTRIDGE

IF THE CARTRIDGE IS OEM EMPTY AND NEVER HAS BEEN REFILLED IT HAS TO BE CLEANED OUT FIRST BEFORE YOU CAN REFILL IT.

If it has been refill before then this will work. Here is the break down way.

1.) On the side of the toner cartridge, remove the three screws you see in Fig, 1.

2.) Remove the end cap and set it aside.

3.) Pull the Hopper Plug out you see in Fig, 2. If needed we have NEW Hopper Plugs.

4.) Then pour the toner into the toner cartridge. Now place the Hopper Plug back in the hole.

5.) Last you will need to replace the smart chip you see in Fig, 3 and then you're done and ready to print.

If you refill this way most of the time you're cartridge is only good for one refill before you need parts. We have a way you can break it down and clean it out, replace any bad parts, and refill it.

We have had many cartridge that have been refilled more than 30 times.