Home | All Instructions | About Us | All Ink & Toner Supplies | Contact Us | Help & Hints | Pay Options
All products are OEM, Compatible or Remanufactured. For items you can't find, please contact us.
( Used sent in Ink Cartridges must be good so we can remanufacture them for you. )
On all toner cartridges and drum units it is best to vacuum them out before you refill them, if they have never been refilled before. To get more toner, drums or any other items needed go to All Supplies at the top of this page.
FAST EASY REFILL ON THIS TONER CARTRIDGE
1.) Tools needed. You will need Needle Nose Pliers to plue out the Hopper Plug from of the side of the toner cartridge.
2.) You will plue the plug out of the side of the toner cartridge.
3.) Then pour the toner into the toner cartridge.
4.) After full clean up around the plug hole real good.
5.) Now place the Hopper plug back into the hole and your done and ready to replace the Smart Chip.
If you don't Vacuum out the Toner Cartridge good before refilling it may back ground on your paper when you go to print.
We have had many cartridge that have been refilled more than 30 times.