Home | All Instructions | About Us | All Ink & Toner Supplies | Contact Us | Help & Hints | Pay Options
All products are OEM, Compatible or Remanufactured. For items you can't find, please contact us.
( Used sent in Ink Cartridges must be good so we can remanufacture them for you. )
On all toner cartridges and drum units it is best to vacuum them out before you refill them, if they have never been refilled before. To get more toner, drums or any other items needed go to All Supplies at the top of this page.
EASY REFILL ON THIS TONER CARTRIDGE
1.) To release the toner hopper section, remove the two screws as indicated in Fig. 1.
Fig, 1
2.) NOTE: Be careful as there may be toner remaining in the hopper.
3.) You will pour the toner into the hopper hafe of toner cartridge before you place it back on the cartridge. NOTE: Read all the refill info before you do this part of the refill.
4.) It is best to clean out the waste toner each time you refill your cartridge.
Fig, 2
5.) NOTE: The waste hopper section contains the PCR, PCR cleaner, wiper blade and chip.
6.) To release the waste hopper section, remove the two screws holding it in place as indicated in Fig. 2.
Fig, 3 ( Vacuum up and out all the waste toner! )
7.) To gain access to and clean the waste hopper unit, remove the PCR and PCR cleaner by removing the two screws on the clear plastic clips (Fig. 3).
8.) To replace the chip info.
10.) And your done and ready to print.
We have had many cartridge that have been refilled more than 30 times.