Home | All Instructions | About Us | All Ink & Toner Supplies | Contact Us | Help & Hints | Pay Options
All products are OEM, Compatible or Remanufactured. For items you can't find, please contact us.
If you need any help please email us.
( Used sent in Cartridges must be good so we can remanufacture them for you. )
On all toner cartridges and drum units it is best to vacuum them out before you refill them, if they have never been refilled before. To get more toner, drums or any other items needed go to All Supplies at the top of this page.
FUSE REPLACEMENT
The Transfer Belt Unit will have a Small Circuit Board in it with the fuse on it.
1.) Remove the two (2) screws as indicated in Fig. 1.
Fig. 1
2.) Now pull the Small Circuit Board out you see in Fig. 2.
Fig. 2
2.) Now to replace the fuse you see in Fig. 3 .
You will see the GREEN FUSE on the Small Circuit Board.
Fig. 3
3.) You will Disconnect the board the tap the exposed leads on the back to avoid shorts and cut the old fuse out and solder the new one in place.